Modification of PAE-degrading Esterase(CarEW) for Higher Degradation Efficiency Through Integrated Homology Modeling,Molecular Docking,and Molecular Dynamics Simulation

Six phthalate acid esters(PAEs) priority pollutants[dimethyl phthalate(DMP), diethyl phthalate(DEP), dibutyl phthalate (DBP or DNBP), di-n-octyl phthalate(DNOP), di 2-ethyl hexyl phthalate(DEHP), and butyl benzyl phthalate(BBP)] were opted as the research object. PAE-degrading esterase CarEW(PDB ID:1C7I) isolated from Bacillus subtilis acting as a template and an iterative saturation mutation strategy was adopted to modify key amino acids to attain efficient PAE-degrading esterase substitutes with a reasonable structure constructed by homology modeling method. Present study designed a total of 285 unit-site and multi-site substitutions of PAE-degrading esterase using the homology modeling method. Among them, 207 PAE-degrading esterase substitutions, which contained the 6-site PAE-degrading esterase substitute 1C7I-6-9 with 84.21% enhancement intensity of degradation ability revealed better degradability to all the 6 PAEs after modification. Moreover, molecular dynamics simulation based on the Taguchi method reported the optimal external application environment for PAE-degrading esterase substitutes as follows:pH=6, T=35℃, the rhamnolipid concentration was 50 mg/L, the molar ratio of nitrogen to phosphorus(N:P) was 10:1, the concentration of H₂O₂ was 50 mg/L, and the voltage gradient was 1.5 V/cm. The degradation ability of PAE-degrading esterase substitutes was found to be elevated by 13.04% as compared to that of the blank control under the optimal condition. Moreover, 11 highly efficient PAE-degrading esterase substitutes with thermal stability were designed.     

Analytical analysis of anisotropic thermophoresis of a charged spheroidal colloid in aqueous media for extremely thin EDL cases

Thermophoresis of charged spheroids has been widely applied in biology and medical science. In this work, we report an analysis of the anisotropic thermophoresis of diluted spheroidal colloids in aqueous media for extremely thin EDL cases. Under the boundary layer approximation, we formulate the thermophoretic velocity, the thermophoretic force, and the thermodiffusion coefficient of a randomly dispersed spheroid. The parametric studies show that under the aforementioned conditions, the thermophoresis is anisotropic and its thermodiffusion coefficient should be considered as a vector, D _T. The thermodiffusion coefficient values and directions of D _T are strongly related to the aspect ratio and the angle θ between the externally applied temperature gradient and the particle's axis of revolution: The increasing aspect ratio enlarges the thermodiffusion coefficient value D_T of prolate (oblate) spheroids to a constant value when θ < 60° (θ > 45°), and it reduces D_T of prolate (oblate) spheroids to a constant value when θ > 60° (θ < 45°). The thermodiffusion coefficient direction of both prolate and oblate spheroids deviates slightly from −∇T_∞ for a small aspect ratio, and such deviation becomes serious for a large aspect ratio.     

一种检测CO32-比率荧光探针的合成及其在细胞成像中的应用

本文设计开发了一种以2,6-二甲酰基对甲苯酚为母体的新型荧光探针HMI,可用于高效识别EtOH-H₂O (8/2, v/v, HEPES 10 mM, pH =7.4)体系中的CO_3^2-。HMI在660 nm处显示发射带,加入CO_3^2-后,在600 nm的等吸收点激发时,原来在660 nm处的荧光淬灭,而以540 nm为中心的新发射带荧光显着增加,为比率型荧光探针。HMI对CO_3^2-表现出高选择性且具有较强的抗干扰能力。此外,荧光探针HMI对CO_3^2-荧光响应的检测限较低,可达到3.938×10^_-6 M。更具有意义的是,HMI探针对CO_3^2-的检测能够在实际水样中起到很好的应用,而且细胞成像研究表明,HMI可用于活体MCF-7细胞中CO_3^2-的成像。     

d-f跃迁发光稀土配合物研究进展

稀土配合物独特的发光性质使其在众多领域有很大的应用价值。其中, d-f跃迁发光稀土配合物具有跃迁宇称允许、激发态寿命短和光谱可调等特点,但相关研究还有待进一步深入。本文介绍了稀土配合物的发光机制,综述了具有d-f跃迁发光性质的稀土配合物(主要是Ce³⁺, Eu²⁺, Yb²⁺和Sm²⁺配合物)的研究进展,并初步总结了配合物分子结构对d-f跃迁发光性质的影响规律。     

Aryl groups,supplement of amino protecting group chemistry!

Amino group protective strategy has consequently emerged in multistep organic synthesis. Easy and selective deprotection procedures are crucial to facilitate the chemical transformation. Recently, Zhang's group from Henan Normal University collaborating with Chen's group of Nankai University developed a novel strategy for the regiospecific cleavage of inert aryl C-N bonds in N-aryl amides by hypervalent iodine(V) reagents. These procedures allow removal of sort of aryl groups under mild conditions to give primary amides in high efficiency. It bestows these aryl groups with the characteristics of amino protecting groups that might be the supplement of amino protecting group chemistry.     

铜修饰微电极阵列硝酸根检测（英文）

许多水域含有过量的硝酸根,会诱发许多问题。采用微机电系统工艺,制备出一种基于铂叉指微电极阵列的硝酸根离子(NO-3)检测微传感电极。通过电化学恒电位沉积法在铂叉指微电极阵列上修饰,得到多孔、簇状铜敏感膜。采用线性扫描伏安电化学检测方法,考察该微传感电极对NO-3的响应性能,在0~2mg/L浓度范围内,线性度为0.999,灵敏度为-3.15μA·L·mg-1。在相同沉积修饰条件下,叉指微电极比同等敏感面积(1mm2)的圆盘微电极表现出更强的催化活性和更高的灵敏度,分析其原因,认为主要是叉指微电极的结构和边缘效应造成的。     

Superthermostability of nanoscale TIC-reinforced copper alloys manufactured by a two-step ball-milling process

A Cu-TiC alloy, with nanoscale TiC particles highly dispersed in the submicron-grained Cu matrix, was manufactured by a self-developed two-step ball-milling process on Cu, Ti and C powders. The thermostability of the composite was evaluated by high-temperature isothermal annealing treatments, with temperatures ranging from 727 to 1273 K. The semicoherent nanoscale TiC particles with Cu matrix, mainly located along the grain boundaries, were found to exhibit the promising trait of blocking grain boundary migrations, which leads to a super-stabilized microstructures up to approximately the melting point of copper (1223 K). Furthermore, the Cu-TiC alloys after annealing at 1323 K showed a slight decrease in Vickers hardness as well as the duplex microstructure due to selective grain growth, which were discussed in terms of hardness contributions from various mechanisms.     

Miscibility and crystallization behaviors of stereocomplex-type poly(l- and d-lactide)/poly(methyl methacrylate) blends

Stereocomplex-poly(l- and d-lactide) (sc-PLA) and poly(methyl methacrylate) (PMMA) blends were prepared by solution blending at PMMA loadings from 20 to 80 mass%. The miscibility and crystallization behaviors of the blends have been studied in detail by differential scanning calorimeter. The single-glass transition temperatures (T _g) of the blends demonstrated that the obtained system was miscible in the amorphous state. It was observed that the crystallization peak temperature of sc-PLA/PMMA blends was marginally lower than that of neat sc-PLA at various cooling rates, indicating the dilution effect of PMMA on the sc-PLA component to restrain the overall crystallization process. In the study of isothermal crystallization kinetics, the reciprocal value of crystallization peak time ( \( t_{\text{p}}^{ - 1} \) ) decreased with increasing PMMA content, indicating that the addition of non-crystalline PMMA inhibited the isothermal crystallization of sc-PLA at an identical crystallization temperature (T _c). Moreover, the negative value of Flory–Huggins interaction parameter (χ ₁₂ = ?0.16) of the blend further indicated that sc-PLA and PMMA formed miscible blends.     

Aliphatic Organoimido Derivatives of Polyoxometalates Containing a Bioactive Ligand

A series of aliphatic organoimido derivatives of hexamolybdate based on amantadine, namely (nBu₄N)₂[Mo₆O₁₈(?NC₁₀H₁₅)] ( 1 ), (nBu₄N)₂ {cis‐[Mo₆O₁₇(?NC₁₀H₁₅)₂]} ( 2 ), (nBu₄N)₂{trans‐[Mo₆O₁₇(?NC₁₀H₁₅)₂]} ( 3 ), and (nBu₄N)₂[Mo₆O₁₆(?NC₁₀H₁₅)₃] ( 4 ), was synthesized in reasonable yield by dehydration with N,N′‐dicyclohexylcarbodiimide (DCC). They were characterized by IR and UV/Vis spectroscopy, elemental analysis, ESI mass spectrometry, and single‐crystal X‐ray structure analysis. The spectral and structural similarities and differences between monosubstituted, cis‐disubstituted, and trans‐disubstituted organoimido derivatives were elucidated and may provide guidance for related work on organoimido‐functionalized Lindqvist‐type polyoxometalates. In addition, trans‐disubstituted and polysubstituted derivatives containing aliphatic organoimido ligands have not yet been reported, and the crystal structure of the trans isomer may lead us to a deeper understanding of disubstituted derivatives. Furthermore, proliferation and morphology of MCF‐7 cells were studied with compound 1 . The present results show that the DCC‐dehydrating protocol could be an efficient approach to covalently graft bioactive ligands such as amantadine onto POMs and enhance their application in clinical cancer treatment.